96302

Kivi õli on looduslike õlide baasil valmistatud toode. Kivi õli on 100 % looduslik. Toode ei sisalda lahusteid. Kivi õli imendub kivi sisse kaitstes teda niiskuse ja mustuse eest ning toob esile kivi kauni tekstuuri. Kivi õliga sobib õlitada viimistlemata kivipinnad sisetingimustes.
Kulu kivipinnale on 8 -10 m2/l.
Kasutuskohad:
kivist ahjud ja kaminad
pesuruumi kivipõrandad
looduskivist pinnad
Eeltöötlus: Puhasta vanad viimistletavad pinnad seebilahusega. Lase pinnal korralikult kuivada.
Kasutamisjuhend:
Ei lahjendata. Sega hoolikalt enne kasutamist. Doseeri materjali õhukeste kihtidena pintsli või lapiga. Anna õlil imenduda umbes 30 minutit ning pühi ära liigne õli, mis enam ei imendu. Viimistluskihtide arv on 1-3 sõltudes pinna kvaliteedist ja kasutamise eesmärgist. Kiviõli ei sobi värvitud või glasuurpindadele. Kasutamine muuks otstarbeks ja vastupidiselt antud nõuannetele ei ole soovitav.
Kuivamisaeg: Õhukeselt pintseldatuna 1-2 ööpäeva alusmaterjalist sõltuvalt.

Herdins vesilahuseline pulberpeits klassikaliseks peitsimiseks. Annab tulemuseks kauni toonitud pinna. Suur värvivalik võimaldab leida õige tooni just sellele puuliigile, mida tahetakse peitsida.
Kuna Herdins pulberpeits ei sisalda sideaineid, siis tuleb pind üle lakkida või vahatada.

Kasutusvalmis sidevaik kiirkuivava puidupahtli iseseisvaks valmistamiseks. Segades puidu lihvimisel saadud puidutolmu sidevaiguga saame pahtli, millele täpselt selle puidu toon.

Floor Oil is based on natural linseed oil. It preserves natural tone of old and new wooden floors. Floor Oil accentuates the texture of the wood and protects it from wear-out and moisture.Floor Oil is ideal for keeping the floors and staircases natural.Floors which have been oiled, should be cleaned regularly with dry vacuum or a brush and wiped with moistened cloth. Worn-out areas can be cured with a new layer of Floor Oil. Heavily trafficked areas should be treated with maintenance layer of Floor Oil every 3 – 4 months, other areas once or twice a year. Floors treated with wax should be cleaned with the dry vacuum or a brush and polished with dry cloth to provide a sheen.

Place of use

wooden floors, wooden stairs

Instructions

Shake well before use. Make sure the floor is dry, clean and polished with sandpaper. Floor Oil can be toned with paint pigments- average dosage 5 %. Apply thin layer of Floor Oil to the surface with the brush or a cloth and let it absorb. Remove all unabsorbed oil from the surface not later than 30 minutes. Let it dry for at least 12 – 15 hours before applying the next layer. The amount of layers is 1 – 3 depending on the quality and the purpose of use of the surface. Finish with floor wax if necessary. Warning: Floor Oil can darken certain type of woods. It is advisable to test a small area first. Floor Oil is not suitable for varnished, painted or vinyl surfaces. Usage for other purposes and against the directions is not recommended.

This product is a natural shellac sealer, made with the highest quality waxed lemon ABTN shellac. Its high solid content make this product an ideal base for the traditional warm and bright finish associated with classic furniture.
The wood must not be varnished; it must be free of dust, grease and wax. Check that any stains that have been applied (Stain concentrate, Spirit stains) are perfectly dry.
The product must be applied at a room temperature no lower than 10°C.
Apply evenly using a pad or brush.
Powder is produced after 10-15 minutes, completely dry after 30 minutes. Sand lightly (240-360 grain) and then apply a second coat.
When completely dry, finish with Shellac french polish or Beeswax in paste form.