Products in stock

Ümmargune valge portselanist harutoos, kõrgus 35mm, läbimõõt 76mm.

Puidu, metalli ja betooni kraapimiseks
• Kõvasulam tera püsib terav kuni 50 korda kauem kui tavalisest terasest tera
• Värvi kaabitsa tera patenteeritud lainekujuliste servadega
• Terad on kahe servaga ja sobivad Bahco 650 kaabitsale

• Puidu, metalli ja betooni kraapimiseks
• Kõvasulam tera püsib terav kuni 50 korda kauem kui tavalisest terasest tera
• Terad on täppislihvitud kergelt kumera kujuga, mis ei lase tera nurkadel tööpinda kriimustada
• Kaheservaline tera on kergesti pööratav ja muudetav erinevate raadiuste või nurkade jaoks
• Tera sobib Bahco 650 kaabitsale

Miinuspeaga messingkruvi nikeldatud viimistlusega.

10A, 10 AX, AC 250V
- Rated power of the SBL (self-ballasted lamps) circuit up to 10A: max. 100W - Porcelain central insert, duroplast toggle
- Ø central insert 50 mm
- Ø support frame 70 mm
- Installation depth of support frame without brackets 25 mm

NCS värvikaart, pehmete kaantega.

HOLZ 2000 is a formulated biodegradable professional product with a registered active substance (EC 258-067-9) and therefore free from particular legislations. The gradual drying allows a deep penetration, without marks or smears after application, allowing any final overcoating. It has a good aggressiveness, without altering the wood fiber, it guarantees a very good result that prevents and eliminates all harmful agents to wood such as woodworm and parasites in general.
Method of Usage
For use on a corroded or weakened support, apply Holz 2000 abundantly using a brush, spray or, if possible, by immersion. To improve the effect of the treatment, we advise covering the support with a tarpaulin or plastic which blocks transpiration.
Wait 12-24 hours, depending on the type of wood and the amount of product that has been applied.
For prevention fill, sand and finish the surface.
For treatment decide whether a new application of Holz 2000 is needed before passing onto any other phases.

Ready to use fast drying acrylic resin dispersion solvent which reinforces and hardens any type of weakened wood from insects or anything that’s worn in time. Completely transparent it doesn't alter the natural tone, but penetrates deeply and seals the wood and recreating the original consistency, protecting it from further aggression. Internal and external use.
On natural unvarnished wood, filled with 1PK quick drying wood filler, Ecofiller, Two component filler sanded, free of dust, grease and wax. Check that any stains that have been applied (Multipurpose concentrated dye, Spirit stain) are perfectly dry.
Evenly apply an abundant amount using a brush. To improve the result, repeat the operation 2-3 times, waiting app. 30 minutes between each coat.
Leave to dry for 6-8 hours at a temperature of 20°C.
Sand lightly (220-240 grain), varnish or wax. If a shellac finish is needed, apply the Shellac french polish. For a wax finish use the Beeswax in paste form, for an oil finish use Hard finishing oil.

Punane pistikupesa, sisu, võimalik kombineerida ümmarguse ja kandilise raamiga. Raam valida eraldi.

Metallilehest lukusilt, viimistlemata, soovi korral võimalik saada ka tsingituna.

Külmvaltsitud terasest servariiv. Võimalik saada tsingituna ja tsinkimata.

18" = 441 mm, pillar 25 mm, piston 12 mm

Külmvaltsitud terasest servariiv. Võimalik saada tsingituna ja tsinkimata.

Pudel ja kork pintsliga.