Limeplaster with fiber, 20 kg
SKU: 1012
Price:
42,70 €
Lubipõhine tasandus-, renoveerimis- ja viimistluskrohv Ecoras koosneb looduslikust hüdraulilisest
lubjast, kuni 0,8 mm terasuurusega silikaatliivast ning looduslikest lisaainetest,
mis tagavad krohvitud pinnale suure veeauruläbilaskvuse. Lubikrohvi on kuivsegust kerge
valmistada ning pinnale kanda. Krohv nakkub tugevasti aluspinnaga, on elastne ning
tänu kõrgele veeaurujuhtivusele tagab niiskuse efektiivse eemaldamise pinnast. Toote
tasakaalustatud mehhaanilised omadused vähendavad märgatavalt pragude tekke ohtu.
Krohv ei sisalda vees lahustuvaid soolasid.
SOBIVAD ALUSPINNAD Sobib uue ning vanema lubikrohvi, hüdraulilise lubikrohvi, lubitsementkrohvi ja loodusliku
putsolaani põhise krohvi tasandamiseks ning viimistlemiseks välis- ning sisetööl. Eriti sobiv
eelnevalt lubikrohviga Ecode või Ecoin kaetud pinna viimistlemiseks. Tänu kõrgele veeaurujuhtivusele
ning tasakaalustatud mehaanilistele omadustele sobib krohv vanade hoonete
niiskuse ning aja poolt kahjustatud krohvipindade taastamiseks ning kasutamiseks viimistluskrohvina
kuivatavas krohvisüsteemis.
Krohvi Ecoras ei kanta kunagi otse kivimüüritisele, vaid see on mõeldud üksnes aluspinnal
oleva krohvi tasandamiseks. Toode ei sobi suurte ebatasasustega pinna, isoleerimata kriidipinna
ning betoonpinna viimistlemiseks.
lubjast, kuni 0,8 mm terasuurusega silikaatliivast ning looduslikest lisaainetest,
mis tagavad krohvitud pinnale suure veeauruläbilaskvuse. Lubikrohvi on kuivsegust kerge
valmistada ning pinnale kanda. Krohv nakkub tugevasti aluspinnaga, on elastne ning
tänu kõrgele veeaurujuhtivusele tagab niiskuse efektiivse eemaldamise pinnast. Toote
tasakaalustatud mehhaanilised omadused vähendavad märgatavalt pragude tekke ohtu.
Krohv ei sisalda vees lahustuvaid soolasid.
SOBIVAD ALUSPINNAD Sobib uue ning vanema lubikrohvi, hüdraulilise lubikrohvi, lubitsementkrohvi ja loodusliku
putsolaani põhise krohvi tasandamiseks ning viimistlemiseks välis- ning sisetööl. Eriti sobiv
eelnevalt lubikrohviga Ecode või Ecoin kaetud pinna viimistlemiseks. Tänu kõrgele veeaurujuhtivusele
ning tasakaalustatud mehaanilistele omadustele sobib krohv vanade hoonete
niiskuse ning aja poolt kahjustatud krohvipindade taastamiseks ning kasutamiseks viimistluskrohvina
kuivatavas krohvisüsteemis.
Krohvi Ecoras ei kanta kunagi otse kivimüüritisele, vaid see on mõeldud üksnes aluspinnal
oleva krohvi tasandamiseks. Toode ei sobi suurte ebatasasustega pinna, isoleerimata kriidipinna
ning betoonpinna viimistlemiseks.
Similar products
Eestis toodetud traditsiooniline lubipahtel. Toon naturaalne valge. Foto alaosas võõbatud üle kaseiinvärviga.
SKU: 1280
28,00 €
For centuries already the world of construction has known a material burned from limestone-lime. It has been more than a hundred years since lime has been burned in the major Estonian island-Saaremaa (Ösel). Limex Ltd., a private capital based limited company, which was established in 1994, renovated an old limekiln and started to burn lime there using a cenutires-old technology, which has practically not changed and ensured the production of quality lime for more than 50 years. The peculiarity of the technology and a guarantee of high quality is manual work, which begins from the selecting of limestone to be burned and ends with the sorting of the finished produce into different quality grades. Only well-dried wood is used for burning, which does not produce additives lowering the quality. The planned annual is up to 500 MT of high-quality lime in the form of paste (or putty, approx. 50% water), which is preserved in underground storage pits, where the lime also ripes further.
Lime has been used as a building material for very long, however, especially intensively since 15th-16th century, and in Europe the main construction materialused in Hanseatic towns has also been lime. We believe that lime is the most suitable material for plastering and painting of historic buildings and facilities without hydroislotaion, as lime lets the water vapor to pass through. Lime is also used in new buildings because if plasters and paints contain natural lime, the wall can “brethe” freely and humidity can travel around without causing serious consequences on the finished surface. Here the following rule should be followed: whitewash on coat of plaster and cement whitewash on lime cement plaster. Whitewash can also treated with natural pigments. Today it is also important that lime is a natural construction material and is environment- and consumer-friendly.
Lime has been used as a building material for very long, however, especially intensively since 15th-16th century, and in Europe the main construction materialused in Hanseatic towns has also been lime. We believe that lime is the most suitable material for plastering and painting of historic buildings and facilities without hydroislotaion, as lime lets the water vapor to pass through. Lime is also used in new buildings because if plasters and paints contain natural lime, the wall can “brethe” freely and humidity can travel around without causing serious consequences on the finished surface. Here the following rule should be followed: whitewash on coat of plaster and cement whitewash on lime cement plaster. Whitewash can also treated with natural pigments. Today it is also important that lime is a natural construction material and is environment- and consumer-friendly.
SKU: 21
From 0,00 €
