Products

Trükime trafarettmustreid seina või teeme trafareti (šablooni) vastavalt soovile. Trafarette teeme nii nagu vanasti tehti, immutame paberi värnitsaga ja lõikame käsitsi mustri sisse, soovi korral saab trafareti lõigata ka moodsate vahenditega kile sisse. Viimane olulisem töö Olustvere aednikumaja mustrite kandmine seina.

Elastne plastikkellu läikekrohvide peale kandmiseks.

Imitatsioonikuld, lehe suurus 160mmx160mm, pakis 100 lehte, toon sarnaneb 23,25 karaadise vana kulla tooniga.

Paraloid B-72 on konserveerimises kasutatav termoplastne valguskindel akrüülvaik, mis ei moodusta vananedes ristsidemeid (jääb seega pööratavaks).

Uksekell puidust karbiga, koopia 1920ndatel toodetud kellast. Heli 86dB, reguleeritav. Kella kõrgus 168mm, laius 97mm, sügavus 85mm.

Sidrunhape (E330) on keemiliselt vees hästi lahustuv, värvuseta kristalne keskkonnasõbralik aine. Vees lahustunult loob sidrunhape mõõdukalt happelise keskkonna, mis pärsib mitmete mikroobide arengut ja on puhastava ja katlakivi lahustava toimega.
Kasutuskohad: Koduses majapidamises on sidrunhape tõhus katlakivi eemaldaja, kasutatakse meditsiinis ning ka keskkonnasõbralikes pesuvahendites, lisab pesuaktiivsust ja lõhustab katlakivi. Kastutatakse vee pehmendajana, 6% lahus eemaldab tõhusalt seebi ja katlakivijäägid vannitoast, pinnad hiljem loputada. Ei sobi happetundlikele pindadele.Sidrunhape on tuntud toidulisand ja säilitusaine.
Hoida lastele kättesaamatus kohas!

Mis on meie talu- ja koduaedadele iseloomulik ning mis on nende kujunemist mõjutanud ja suunanud? Mida on aiapidamine tähendanud ja mil moel talletavad vanad aiad seal kunagi toimetanud inimeste püüdlusi ja saavutusi? Kas ja kuidas väljendub aedades aiapidaja varanduslik ja sotsiaalne seisund? Nendele ja teistelegi küsimusele meie koduaianduse arenguloos otsib oma oma vastilmunud raamatus „Eesti aia ajalgu“ vastuseid Eesti Vabaõhumuuseumi kuraator Anneli Banner.

Restaureerime maalinguid, Viimase aja olulisem objekt on Vallikraavi 14, Tartus.

Vahetatavate otstega auguraud, läbimõõtudega 2, 3, 4, 5 ja 6 mm. Sobilik naha, papi, paberi, korgi, plastiku lõikamiseks.

Fast Patina from Borma Wachs is a professional product. It is mainly used to give an antique effect. Thanks to its special formulation, the product can be applied without problems to PU and acrylic primers, UV and varnish. It is suitable for all types of wooden surfaces. It can also be removed, leaving the color only in the wood pores. This product flows well, dries quickly and is easy to sand. An ideal solution for interiors made of porous wood, such as oak, ash, maple.

Physico-chemical properties:
Density: 0.900 kg/l.
Viscosity (Ford cup n#4, (20°C)): 12 sec. (Product with catalyst and diluent).
Dry residue: 15%.
Solvent: Alcohol or acetone.
Initial boiling point: >35°C.
Flammability point <23°C.
Specific gravity: 0.890 kg/l

Features:
Best imitation of the gilding effect
Wide range of shades
Possibility of application to any substrate (paint and varnish)

Preparation:
Clean the surface to be treated from grease, silicones, rust, old varnishes and dirt. Stir well before use. Not recommended for use in the sun, on hot surfaces, in the presence of rain or in adverse weather conditions.
Always provide adequate ventilation during and after application to facilitate drying and proper curing of the applied product layer.
Prepare the patina for use: dilute it in a 50:50 ratio with acetone or alcohol. Although acetone provides very fast drying and higher hardness, alcohol is slower and provides better sanding. This is good if sanding is done by hand.

Usage:
On a previously coated surface (we recommend white acrylic or PU primer), apply diluted patina in one layer.
In order to obtain the “decape” effect, it is necessary to carry out intermediate sanding of the surface with a high-grain abrasive, which will not remove the patina from the pores of the wood.
To ensure a long-lasting patina, apply a coat of clear acrylic finish.

Drying time:
Solution lifetime: > 3:00.
Drying time: 10-15 minutes (depending on layer thickness and temperature).

Consumption:
Consumption: 30-50 g/m2
Will depend on the preparation of the wood or metal, its species and method of application and may vary ± 30%.

Care:
This is not a stand-alone coating; it requires mandatory finishing. To prevent changes in the gilding effect of the patina, we recommend using solvent-based acrylic systems as a finish. We also recommend choosing high-gloss products to enhance the luxurious finish.

Storage:
Store in a cool, well-ventilated place; keep container closed when material is not in use. Keep away from heat, open flames, sparks and other sources of ignition.
The product is stored for 12 months from the production date.

Important:
Always perform a preliminary test on a hidden area to check if the effect is as desired.
We guarantee the reliability of physical and chemical properties. The final result is influenced by application conditions, solvent, equipment, etc.

Miinuspeaga messingkruvi nikeldatud viimistlusega.

Kuldse varjundiga retropirn Osram Vintage sarjast, soe kollane valgus, E27 4W, 410 lm. Ei sobi dimmerile. Läbimõõt 124mm, kõrgus 168 mm.

Pudel ja kork pintsliga.